High Vacuum Aluminum Brazing Furnace

Description:

High vacuum aluminum brazing furnace is applied for vacuum brazing of material like heat exchanger,air evaporator,condenser,radar grid antenna,wave-guide tube,etc.

Technical Feature:

1. The aluminum brazing tube furnace structure is horizontal,single chamber and loading horizontally.

2. The furnace hearth consists of several zones,wide nickle-chromium alloy heater and multiple layer stainless steel heat steel heat insulation,which has a good temperature uniformity.

3. The vacuum system inlet is configured with gas condensate steering device and filter collection device,preventing welding vapor polluting the vacuum pump.

4. Unique rear insulation technology assures larger radiation area and better insulation performance.

    

   Optional configuration of High Vacuum Aluminum Brazing Furnace

   1.Furnace door type:on-line,vertically up and down,rotating

   2.Vacuum pump and gauge:foreign brand/high-quality Chinese brand

   3.PLC:OMRON/Siemens/Mitsubishi

   4.Temperature controller:SHIMADEN/EUROTHERM/Honeywell

   5.Thermocouple:style,K type.N type

   6.Record:Paperless recorder/paper recorder

   7.HMI:Simulation screen/Touch screen

   8.Electric components:High-quality domestic brand/Schneider/Siemens

Specification of High Vacuum Aluminum Brazing Furnace:

Spec\Model	VAB-446S	VAB-557S	VAB-6694S	VAB-7711S	VAB-8812S	VAB-9915S	VAB-121230S
Effective hot zone size W*H*L(mm)	400*400*600	500*500*700	600*600*900	700*700*1100	800*800*1200	900*900*1500	1200*1200*3000
Load Capacity(kg)	200	300	400	800	1000	1200	3000
Heating Power(kw)	45	75	90	180	210	300	660
Max.Temperature(℃)	700	700	700	700	700	700	700
Temperature Uniformity(℃)	±3	±3	±3	±3	±3	±3	±3
Vacuum degree(Pa)	8*10-4	8*10-4	8*10-4	8*10-4	8*10-4	8*10-4	8*10-4
Pressure Increase Rate(Pa/h)	≤0.26	≤0.26	≤0.26	≤0.26	≤0.26	≤0.26	≤0.26
	≤0.65	≤0.65	≤0.65	≤0.65	≤0.65	≤0.65	≤0.65